跳转至

Firmware Release Notes

[v0.3.2] Release v0.3.2 (2025-12-14)

  • Adjust sensor hardware settings for new ITO glass
  • Change case LED pwm pin to production version
  • Better idle LED effect
  • Fix NFC reader and LED
  • Fix HID and joystick
  • Temporary fix PC module stuck while sending 160 bytes data

[v0.3.1] Release v0.3.1 (2025-12-12)

  • Fix bugs from NFC
  • Add fake card emulation for NFC

[v0.2.2] Release v0.2.2 (2025-10-29)

  • Fix PC Protocol. Now it can send big packet.
  • Perform multiple selftest on PSoC during startup
  • Increase I2C clock frequency and use a 60Hz refresh rate during touch debugging
  • Add idle effect for button ring. Now the button will light up in red when pressed if not connected
  • Add SEGGER RTT for debug
  • Some Refactoring of IO Modules

[v0.2.1] Release v0.2.1 (2025-09-18)

  • Fix NFC protocol to correctly handle Felica data
  • Fix Joystick protocol to correctly handle top led data
  • Use pre-calculated gamma lut to speed up initialization

[v0.2.0] Release v0.2.0 (2025-09-15)

  • Drive external LED and case LED
  • New LED driver
  • LED brightness control
  • New PSoC driver with manual config
  • 1P/2P mode switch

[v0.1.1] Release v0.1.1 (2025-08-27)

  • Fix PC protocol
  • Add command to reset config to default
  • Fix touch sensor self-test
  • Add firmware version to PC protocol

[v0.1.0] Release v0.1.0 (2025-08-11)

First Release Edit for test